Getinge HS-333 Reverse Osmosis Membrane (61301606162 / 210014).
SKU:210014
Premium Getinge HS-333 reverse osmosis membrane (61301606162).
Membranes required for Getinge / Watts HS-Series water system:
- HS-333 requires two (2)
Brand | N/A |
---|---|
Family | N/A |
Model | N/A |
Is Featured Product | No |
Getinge HS-333 Reverse Osmosis Membrane (61301606162 / 210014).
SKU:210014
Premium Getinge HS-333 reverse osmosis membrane (61301606162).
Membranes required for Getinge / Watts HS-Series water system:
Premium Getinge HS-333 reverse osmosis membrane (61301606162). Made in the USA in ISO 9001:2008 Certified Facilities. Replace your old Getinge RO Membrane with this Superior Premium Replacement.
Membranes required for Getinge / Watts HS-Series water system:
Install this membrane with the brine seal oriented opposite the direction of the water flow arrow on the membrane housing. Call us if your have any questions.
Specifications
Recommended Operation Conditions:
Maximum Applied Pressure: 300 psi (2.1 MPa)
Maximum Feed Flow Rate - 4" elements: 17 gpm
Maximum Operating Temperature: 113° F (45° C)
Maximum Feed Water Turbidity: 1 NTU
Maximum Feed Water SDI (15min): 4
Chlorine Tolerance: 0
Feedwater pH Range, continuous operation: 2-11
Feedwater pH Range, short-term cleaning (30 min): 1-12
Single Element recovery %: 15
Note: Performance specifications based on, 2000 mg/l sodium chloride, 100 psi applied pressure, 77°F (25°C) feed water temperature, pH 8 and 10% recovery. Element permeate flow may vary -15%/+25%. These membranes produce similar product flow as the earlier models but at a lower pressure.
Customers who bought this product also commonly purchased the following combination of items.
Total Price $4,883.00